Control4: Debugging Enabled: Warning

Control4: Debugging Enabled: Warning

Diagnostics may show the following warning

Quote
Debugging Enabled: Warning
  Driver Debugging is enabled. This may result in greatly increased CPU and memory usage whilst enabled

Causes

This is caused by the Debug Mode property being not set to off

Solution

This is simply an indicator that CPU usage and memory usage may be higher than normal, and can be safely ignored. Debugging will turn off automatically after 24 hours. However system load and memory usage may be higher than normal. Before running troubleshooting with control4, it is recommended to set Debug Mode to "off". 

    • Related Articles

    • Control4: Memory Usage: Warning

      Diagnostics show the following Memory Usage: Warning Driver Memory Consumption is higher than expected. This may be normal on some drivers. Cause This is for internal troubleshooting only and indicates that the driver may be using more memory than ...

    • Control4: Driver Anomalies: Warning

      Driver Diagnostics shows Driver Anomalies: Warning Driver Anomaly Detected. If undesired behavior is experienced, please Submit Diagnostics (located in the Actions Tab) and reach out to Chowmain Support with the Diagnostics ID and description of the ...

    • Control4 Govee: Enable Local Network Control and Troubleshooting Local Lights

      Not all Govee lights Support LAN control (an example is that many of their GU10's only support cloud). Some lights may also offer the LAN control setting, however, the protocol may be broken. To confirm full LAN control is supported, use: ...

    • Control4: Driver Versions Mismatch: Warning

      Driver Diagnostics Shows Driver Versions Mismatch: Warning One or more driver installed in this package are using a different driver version.This may cause unexpected behaviour. It is recommended to update all drivers to the same version unless ...

    • Control4 Shelly: High CPU or Memory Usage

      Ensure that all Shelly drivers are upgraded to the latest version from the Chowmain Website. Please note, in some circumstances a licence migration may be required. Some older installations using Gen 1 drivers may need the poll rate to be adjusted, ...