Dooya
CONTROL4 DOOYA: Devices will not discover
The Control4 Dooya driver communicates with all Dooya Connector Bridge devices on the local network using UDP multicast. This allows the driver to broadcast discovery and control messages that can be received by all Dooya bridges simultaneously, ...
CONTROL4 DOOYA: Shade Discovery Successful but Control Unavailable
Symptoms The driver successfully discovers and imports shades; however, it is unable to control them. Cause This issue typically occurs when the Dooya Connector Bridge has been previously paired with a different account. In such cases, the bridge ...
CONTROL4 DOOYA: Configuration for Araknis 220/320/420 Switches
Note: Enable these settings on every managed switch on the network, unless a step specifically states it is for a core switch. Navigate to Settings > Multicast. Click the IGMP Snooping tab > Global Settings tab. Set the status to Enabled, then click ...