CONFIG: DirectTV Navigational Control Not Working (AndroidTV/Zank)
If navigational control is not working (Left, Right, Select etc), try:
- open the Zank Remote app on DirectTV and enable the option "if mouse click not working, let try enable this option"
- for Control4, set the Control Method to Zank Default (Advanced) or Zank Default
Related Articles
CONFIG: Android TV / Zank Remote
Overview Chowmain's Android TV drivers for various home automation platforms utilise Zank Remote to control Google TV / Android TV / Fire TV devices. All communications between the drivers and the Android device is done via the app. Note that you ...
CONFIG: Setting up Zank Remote for Amazon Fire TV
The Amazon FireTV recently changed there security model which has directly affected the Zank app from sending ADB commands (required for most of the controls we use). There is a work around, it involves some configuration of the router to open a ...
Control4 WiZ: Driver Not working in Control X4 or Later
After Upgrading to Control4 X4 or later, WiZ Stops working and may display errors during driver start Solution Control4 X4 and later requires WiZ driver version 20250721 or later to operate correctly in X4. Please note, a manual update may be ...
Control4 ELK M1: Zone status does not correctly respond properly or Realtime status is not correct
Ensure you are using the latest version of our ELK M1 V2 driver. You can identify this by right clicking on the device in System Design on Composer, and pressing Get Info. The filename must say chowmain_elk_m1_v2.c4z. If the original filename of the ...
Control4 Hisense VIDAA: TV control is erratic
TV Control only works intermittently Solution Ensure that CEC is disabled on the TV. CEC can interfere with control particularly when devices power on or off Check the stability of the network connection. A wired connection is recommended for best ...