Control4 Hisense VIDAA: TV Turns on however does not respond to commands

Control4 Hisense VIDAA: TV Turns on however does not respond to commands

The Hisense TV turns on, however does not respond to commands

Solution 

  1. Ensure the driver is correctly authorised
  2. Ensure the IP is correct and has been set to static. 
  3. Ensure that there are no IP conflicts with other devices and that Control4 can access the device consistantly
  4. Run Display Diagnostics for more information


    • Related Articles

    • Control4 Hisense VIDAA: TV control is erratic

      TV Control only works intermittently Solution Ensure that CEC is disabled on the TV. CEC can interfere with control particularly when devices power on or off Check the stability of the network connection. A wired connection is recommended for best ...

    • Control4 Hisense VIDAA: Initial Setup

      Setup Instructions For TV Turn on Hisense VIDAA TV. Configure TV Channels and settings as required. Ensure the TV is accessible from the same network as the Control4 system. Update the TV firmware to the latest version if necessary. This is normally ...

    • Control4 Hisense VIDAA: Volume Control shows incorrect volume

      Problem The Volume Control shows incorrect volume Solution Ensure that the latest TV firmware is installed Ensure that you are using Driver version 20250910 or later Discrete volume control may not be supported correctly when using ARC and is ...

    • Control4 Hisense VIDAA: System Requirements

      Requirements Only the Hisense VIDAA Platform is supported by the Chowmain Driver. Hisense TV's using Android or other platforms use a different unsupported protocol Control4 OS 3.3.0 or higher. OS3.4.X or later is recommended. X4 is supported ...

    • Control4 Hisense VIDAA: TV does not power on consistantly

      Symptoms TV does not consistently power on Solution Ensure that the TV MAC Address is correct and filled in. This driver relies on WOL for connections Ensure Wake On LAN/Wireless Network operates correctly in the driver. Ensure Wake on LAN/Wireless ...