CONTROL4 INTESIS: Which Models are supported?
Browsing HMS Website
The Control4 Intesis driver is compatible with gateway models that support the Home Automation protocol only. You can find a list of all compatible models via link
here.
You can use the
Intesis HVAC compatibility tool to find out if your HVAC model is supported. Note that you must ensure that the model supports Home Automation protocol as per red circle in screenshot below.
Related Articles
ELAN INTESIS: Which Models are supported?
Browsing HMS Website The ELAN Intesis driver is compatible with gateway models that support the Home Automation protocol only. You can find a list of all compatible models via link here. Intesis Compatibility Tool You can use the Intesis HVAC ...
Control4 Hisense VIDAA: TV control is erratic
TV Control only works intermittently Solution Ensure that CEC is disabled on the TV. CEC can interfere with control particularly when devices power on or off Check the stability of the network connection. A wired connection is recommended for best ...
Control4 Hisense VIDAA: Volume Control shows incorrect volume
Problem The Volume Control shows incorrect volume Solution Ensure that the latest TV firmware is installed Ensure that you are using Driver version 20250910 or later Discrete volume control may not be supported correctly when using ARC and is ...
Control4 Govee: Enable Local Network Control and Troubleshooting Local Lights
Not all Govee lights Support LAN control (an example is that many of their GU10's only support cloud). Some lights may also offer the LAN control setting, however, the protocol may be broken. To confirm full LAN control is supported, use: ...
Control4 Epson Projector: Unable To Connect To Projector
Problem Driver is unable to Connect to Epson Projector in Control4 Solution If using LS12000, please refer to the latest information on: https://help.chowmain.software/portal/en/kb/articles/control4-epson-ls12000 Some projectors may require support ...