CONTROL4 SHELLY SUITE: Device Compatibility

CONTROL4 SHELLY SUITE: Device Compatibility

The following devices have been tested with the Control4 Shelly Suite Driver. Please Note, this list is by no means comprehensive. Due to the design of Shelly Gen 2 (Plus), gen 3 and Gen 4, newly added devices which utilise the same capabilities as supported ones likely support those same capabilities out of the box 

Shelly Module (Generation 1)

Shelly Module NG (Generation 2)

Shelly Module NG (Generation 3)

Shelly ModuleNG (Generation 4)

Shelly Blu

  1. Shelly Suite only supports Shelly IP based devices.  It is not compatible with Shelly BLU devices.
  2. Shelly Blu however can be integrated into Control4 using a Home Assistant Gateway (such as the Home Assistant Green) with our Home Assistant Driver: https://chowmain.software/drivers/control4-home-assistant

    • Related Articles

    • Control4 Shelly: Energy Monitoring Compatibility For Shelly EM, PM and other devices

      Whilst the Chowmain Shelly Suite Driver does not provide a driver for Energy monitoring and Power, Chowmain does provide a wealth of variables which can be used for this purpose which can be discovered using Variable Agent . These can be combined ...

    • CONTROL4 Shelly Suite: Input Connections And Events (Module NG)

      Chowmain's Shelly driver provides a wealth of input connections and events. In most cases, most people will use the following two events: Input State X - Push / Release: Generally bound to toggle when using Button Mode. As a button link, this can ...

    • Control4 Shelly: High CPU or Memory Usage

      Ensure that all Shelly drivers are upgraded to the latest version from the Chowmain Website. Please note, in some circumstances a licence migration may be required. Some older installations using Gen 1 drivers may need the poll rate to be adjusted, ...

    • Control4 Hisense VIDAA - Device Management Menu does not show

      If the Device Management menu doesn't show, take the following troubleshooting steps Ensure the TV firmware is up to date. The Device Management menu may not be available on older firmware versions. Version 9 or later is required (Under About, ...

    • Control4 TP-Link: Unable to Control Device

      General Issues If you are using Control4 4.0.0 or later , you must be using version 20250721 minimum for full support in all drivers. In particular, Versions older than 20241209 will not operate in X4 at all due to changes in Control4, and must be ...