Control4 Unifi: Intercom Drivers Must have Unique Device ID's

Control4 Unifi: Intercom Drivers Must have Unique Device ID's

Symptom

Project contains multiple Intercom device drivers with the same intercom Device ID. Intercom's perform intermittently, or may not operate at all. A diagnostic may indicate that there is a problem

Solution

All Intercom devices added to the Control4 project must have a unique Device ID Selected or duplicates should be deleted. 

Adding multiple drivers to the project with the same ID driver will cause Control4 to continuously reconfigure the intercom preventing normal operation. 

    • Related Articles

    • Control4 UniFi: Manual Setup of UniFi Access V2 Intercom

      Control4 UniFi: Manual Setup of UniFi Access Intercom Device It is strongly recommended to use Auto Setup to correctly configure and add new devices instead of Manual Setup UniFi Protect Intercom V1 is Deprecated. Ensure you are using UniFi Access ...

    • Control4 UniFi: Manual Setup of UniFi Protect Device

      Control4 UniFi: Manual Setup of UniFi Protect Device It is strongly recommended to use Auto Setup to correctly configure and add new devices instead of Manual Setup Ensure that UniFi Protect Controller has been added to project and is correctly ...

    • Control4 Unifi - Control4 Overwrites UniFi Intercom call group settings

      When using the Chowmain UniFi Driver, the Call group table is incorrectly overwritten. By default, the UniFi Driver automatically sync's and configures the table to allow the intercom to communicate overwriting existing information Solution You MUST ...

    • Control4 UniFi: Manual Setup of UniFi Network Device

      Control4 UniFi: Manual Setup of UniFi Network Device It is strongly recommended to use Auto Setup to correctly configure and add new devices instead of Manual Setup Ensure that UniFi Network Controller has been added to project and is correctly ...

    • Control4 UniFi: Intercom has audio, but not video

      Symptoms Intercom audio works, however, video doesn't show correctly Solution Ensure you are using OS 3.4.3 or later. Ensure that Video works in native UniFi interface Ensure you are using the latest UniFi driver version Licence must be trial or ...