Control4 Unifi - Control4 Overwrites UniFi Intercom call group settings

Control4 Unifi - Control4 Overwrites UniFi Intercom call group settings


When using the Chowmain UniFi Driver, the Call group table is incorrectly overwritten. By default, the UniFi Driver automatically sync's and configures the table to allow the intercom to communicate overwriting existing information

 


Solution

  1. You MUST be using Chowmain Unifi driver version 20251106
  2. Ensure that the Control4 Primary Controller is set to static IP (or, DHCP IP reservation). Without this, Unifi will be unable to call the Control4 controller consistently 
  3. In Unifi Door Station Driver in Control4, ensure that intercom calls are operational to Control4 communication devices. This step can be skipped if manual configuration is performed
  4. Set Auto Sync UniFi SIP Settings to "Disabled" in Properties. This will stop Control Overwriting the Settings in UniFi
  5. Update the UniFi Call group settings to include other people to call. Do NOT remove/change the Third Party SIP Settings 


    • Related Articles

    • Control4 UniFi: Unifi Access Quick Setup

      The UniFi access integration enables basic control of doors and intercoms. Install all of the drivers It is recommended to use Drivers => Add Or Update Driver or Agent to install the drivers Use Ctrl+A or use the mouse to install and update all C4z ...

    • Control4 UniFi: Manual Setup of UniFi Access V2 Intercom

      Control4 UniFi: Manual Setup of UniFi Access Intercom Device It is strongly recommended to use Auto Setup to correctly configure and add new devices instead of Manual Setup UniFi Protect Intercom V1 is Deprecated. Ensure you are using UniFi Access ...

    • Control4 UniFi: Setup Unifi Doorbells

      Integration of UniFi Protect Doorbells UniFi Protect Doorbells such as the G4 Doorbell do not provide SIP access and cannot directly integrate using the Intercom/2-way interface. UniFi Intercoms however do support the ability to make calls outgoing ...

    • Control4 UniFi: Setup Door Unlock In Intercom (Custom Buttons)

      To set up Door Unlocking in a UniFi intercom Ensure you are using the latest version of the Chowmain UniFi Drivers: https://chowmain.software/drivers/control4-unifi Add the Intercom as per normal in UniFi Access: ...

    • Control4 Unifi - Supported Intercoms

      Two Way Communications / Intercom Support For the latest list of intercoms which are known to support two way communications (third party SIP) , refer to: ...