CONTROL4 UNIFI PROTECT: Trigger Custom Webhooks

CONTROL4 UNIFI PROTECT: Trigger Custom Webhooks

The Unifi protect application allows Custom webhooks to be created which Control4 can trigger. This provides a deeper level of integration with Unifi for less common commands or command flows. Custom Webhooks can be used for commands such as:

  1. Unlocking Doors
  2. Custom events
  3. Triggering lights
  4. Playing sounds

Setup 

In the UniFi Protect web interface, navigate to the Alarm Manager button


Select Create Alarm. Set Webhook as the trigger type, set the action for the webhook, and record the Trigger ID
Create Webhook

In Control4, in the Chowmain UniFi Protect Controller Driver, either use the Trigger Alarm Webhook Action, or command, and set the Trigger ID to the ID created in the UniFi Protect application

    • Related Articles

    • Control4 UniFi Protect / Access / Network: Receiving Custom Webhooks

      This guide describes how to trigger actions in control4 based on custom UniFi Webhooks. This can be used to perform actions based on advanced UniFi triggers which may not be handled directly. Procedure The Chowmain UniFi Drivers must be 20251215 or ...

    • Control4 UniFi: Unifi Access Quick Setup

      The UniFi access integration enables basic control of doors and intercoms. Install all of the drivers It is recommended to use Drivers => Add Or Update Driver or Agent to install the drivers Use Ctrl+A or use the mouse to install and update all C4z ...

    • Control4 UniFi: Setup Unifi Doorbells

      Integration of UniFi Protect Doorbells UniFi Protect Doorbells such as the G4 Doorbell do not provide SIP access and cannot directly integrate using the Intercom/2-way interface. UniFi Intercoms however do support the ability to make calls outgoing ...

    • Control4 Unifi - Supported Intercoms

      Two Way Communications / Intercom Support For the latest list of intercoms which are known to support two way communications (third party SIP) , refer to: ...

    • Control4 UniFi: Accessing Camera Recordings / Footage and Snapshots in UniFi Protect

      Summary To Access Recorded camera footage for UniFi Cameras, Chowmain have developed a custom interface for the UniFi Protect Driver which provides access. This is required as Control4 does not provide access to snapshots / video under history Setup ...