Control4 Unifi - Supported Intercoms

Control4 Unifi - Supported Intercoms

Two Way Communications / Intercom Support


For the latest list of intercoms which are known to support two way communications, refer to: https://help.ui.com/hc/en-us/articles/31504711305879-Configuring-Third-Party-SIP-Server-with-UniFi-Access

As of October 2025, the following devices are known to support our intercom driver:
Intercoms are deployed in Control4 using our Unifi Access Controller and Unifi Access Intercom V2 Driver

Doorbell Devices

Due to the lack of SIP support, devices such as the G4 Doorbell Pro only support One way video support (as a video camera) and can currently only be utilised by:
1. Using the Ringing event to trigger a notification you can click on to view the built in camera
2. Adding Presets or settings to provide an easy way to unlock the door

Future availability of SIP support on these devices is unknown. 

A full guide to integration is available in our Chowmain Protect Driver Documentation available on: https://chowmain.software/drivers/control4-unifi#documents 

    • Related Articles

    • Control4 Unifi - Control4 Overwrites UniFi Intercom call group settings

      When using the Chowmain UniFi Driver, the Call group table is incorrectly overwritten. By default, the UniFi Driver automatically sync's and configures the table to allow the intercom to communicate overwriting existing information Solution You MUST ...

    • Control4 UniFi - UNVR NVR Stacking Support

      At this time, UNVR Stacking is not supported by the Chowmain driver, and is strongly discouraged by Ubiquiti. Initial investigations have determined that there is limited support for stacked NVR's within the official API which affects control, and ...

    • Control4 UniFi: Manual Setup of UniFi Protect Device

      Control4 UniFi: Manual Setup of UniFi Protect Device It is strongly recommended to use Auto Setup to correctly configure and add new devices instead of Manual Setup Ensure that UniFi Protect Controller has been added to project and is correctly ...

    • CONTROL4 UNIFI PROTECT: Trigger Custom Webhooks

      The Unifi protect application allows Custom webhooks to be created which Control4 can trigger. This provides a deeper level of integration with Unifi for less common commands or command flows. Custom Webhooks can be used for commands such as: ...

    • Control4 Unifi: iPads / iPhone / IOS Crashes when viewing Protect Cameras

      The most common cause of IOS crashes is by third party cameras connected to the Protect system. Improved Stream Compatibility mode may be required to resolve the issue. As of 2025, this can be found in the Unifi Protect Web Administration Interface: ...