Control4 UniFi: System Requirements

Control4 UniFi: System Requirements

What are the Requirements for UniFi?

  1. Control4 OS 3.4.3 is the minimum required. Earlier Control4 OS Versions are not officially supported.
  2. Control4 Core Series Controllers, CA-10 or better is recommended for the best experience
  3. For UniFi Network, Version 9.3.45 Or Better is required
  4. For UniFi Protect, Version 46.0.53 Or Better is required
  5. For UniFi Access, Version 3.4.31 Or Better is required
  6. UniFi hardware must be configured and working prior to installing this driver

    • Related Articles

    • Control4 UniFi Protect / Access / Network: Receiving Custom Webhooks

      This guide describes how to trigger actions in control4 based on custom UniFi Webhooks. This can be used to perform actions based on advanced UniFi triggers which may not be handled directly. Procedure The Chowmain UniFi Drivers must be 20251215 or ...

    • Control4 UniFi: Manual Setup of UniFi Network Device

      Control4 UniFi: Manual Setup of UniFi Network Device It is strongly recommended to use Auto Setup to correctly configure and add new devices instead of Manual Setup Ensure that UniFi Network Controller has been added to project and is correctly ...

    • CONTROL4 UNIFI: Setup API keys correctly to avoid Error 401 / Unauthorised Error

      Important Notice UniFi Access doesn't use the same API Key as UniFi Protect/Network. Keys created for Protect / Network will not work. If the incorrect key is used, you will get a 401 / Unauthorised error in API Connection Status Setting Up UniFi ...

    • CONTROL4 UNIFI: Setting up Local Account / Login for Authentication

      It is strongly recommended to set up a local login for UniFi Control. Whilst the UniFi API Key cannot be shared between Access and Protect/Network, the UniFi Login can. We use a combination of both login and API key to provide the best combination of ...

    • Control4 UniFi - UNVR NVR Stacking Support

      At this time, UNVR Stacking is not supported by the Chowmain driver, and is strongly discouraged by Ubiquiti. Initial investigations have determined that there is limited support for stacked NVR's within the official API which affects control, and ...