Control4 C-BUS: System Requirements

Control4 C-BUS: System Requirements

System Requirements 

  1. You have access to Composer Pro and your Control4 system. Composer Express is not supported.
  2. Your Control4 system is on OS 3.4.0+. Earlier Control4 OS Versions are not officially supported. X4 is supported
  3. The CBus system is fully commissioned and functional.
  4. The CBus interface/gateway is connected and discovered.
  5. You have configured a static IP or DHCP reserved the CBUS CNI/Gateway on your network.

What Gateway's will this work on?

  • Clipsal PC Interface (PCI)
  • Clipsal Network Interface (CNI)
  • Clipsal Network Automation Controller (5500NAC on firmware v1.15.0+) - with CNI functionality enabled.
  • Clipsal Wiser for C-Bus Automation Controller (5500SHAC on firmware v1.15.0+) - with CNI functionality enabled.

    • Related Articles

    • Control4 C-BUS: Multiple Network (Remote CBUS Network) Support

      Does this driver support communication with remote C-Bus networks? The current driver does not support commands to and from remote C-Bus networks. To use this driver on projects with multiple C-Bus networks, you will need to install a C-Bus interface ...

    • Control4 UniFi: System Requirements

      What are the Requirements for UniFi? Control4 OS 3.4.3 is the minimum required. Earlier Control4 OS Versions are not officially supported. Control4 Core Series Controllers, CA-10 or better is recommended for the best experience For UniFi Network, ...

    • Control4 Philips Hue: System Requirements

      Control4 Philips Hue: System Requirements The Chowmain Philips Hue driver requires: Control4 OS 3.4.3. Previous versions may work but are unsupported Hue Bridge Generation 2 or later. Generation 1 is not supported Philips Hue Software Version ...

    • Control4 Hisense VIDAA: System Requirements

      Requirements Only the Hisense VIDAA Platform is supported by the Chowmain Driver. Hisense TV's using Android or other platforms use a different unsupported protocol Control4 OS 3.3.0 or higher. OS3.4.X or later is recommended. X4 is supported ...

    • Control4 Shelly: System Requirements

      Light V2 requires a minimum OS 3.3.0. All other drivers require OS 3.2.1 minimum. (OS 3.4.3 or later is strongly recommended. X4 is supported). Shelly NG devices require OS 3.3.0 or later for compatibility with firmware 1.8 due to Control4 ...