ELAN SKY: No IP control over Sky Q or Sky HD boxes

ELAN SKY: No IP control over Sky Q or Sky HD boxes

Each time a button is pressed within the ELAN Sky+HD / SkyQ driver, it establishes a temporary connection to the Sky set-top box, sends a single command, and then disconnects. If the driver fails to connect, the issue may be caused by one of the following:
  1. Incorrect IP Address: The Sky box’s IP address may have changed. Ensure it is configured with a static or reserved IP address.
  2. IP Conflict: Another device on the network may be using the same IP address, which can prevent communication.
  3. Eco Mode Enabled: When Eco mode is active, the Sky box enters a deep sleep state that disables network access when powered down. Follow the provided link to disable Eco mode.

    • Related Articles

    • CONTROL4 SKY: No IP control over Sky Q or Sky HD boxes

      Each time a button is pressed within the Control4 Sky+HD / SkyQ driver, it establishes a temporary connection to the Sky set-top box, sends a single command, and then disconnects. If the driver fails to connect, the issue may be caused by one of the ...

    • Control4 Hisense VIDAA: TV control is erratic

      TV Control only works intermittently Solution Ensure that CEC is disabled on the TV. CEC can interfere with control particularly when devices power on or off Check the stability of the network connection. A wired connection is recommended for best ...

    • ELAN RATGDO: FAQ

      ratgdo is an open-source device that provides local control and feedback for garage door openers without reliance on cloud services. It connects directly to your garage door motor and network, allowing integration with smart home platforms such as ...

    • Control4 Epson Projector: Unable To Connect To Projector

      Problem Driver is unable to Connect to Epson Projector in Control4 Solution If using LS12000, please refer to the latest information on: https://help.chowmain.software/portal/en/kb/articles/control4-epson-ls12000 Some projectors may require support ...

    • Control4 Hisense VIDAA - Device Management Menu does not show

      If the Device Management menu doesn't show, take the following troubleshooting steps Ensure the TV firmware is up to date. The Device Management menu may not be available on older firmware versions. Version 9 or later is required (Under About, ...