C4 Web To Variables - Identifying Variables and their contents
Variables must first be created by configuring the driver, and using the AutoSetup Variables Action
To identify all available variables created during the AutoSetup Variables action and their contents, use our Control4 Variables Knowledge base article: https://help.chowmain.software/portal/en/kb/articles/control4-identifying-driver-available-variables-and-current-values
Related Articles
C4 Web To Variables - Supported Responses
Web To Variables only supports JSON Type Data: https://en.wikipedia.org/wiki/JSON XML is NOT Supported An Example JSON response is below. Please note, that variable arrays ( between the "[" and "]" brackets) needs to provide consistent data between ...Control4: Identifying Available Variables and Current Values
All Available Driver Variables for devices can be located in the Variables Agent. Please note: Some drivers such as Web To Variables will not display all available variables until configuration of the driver is complete 1. In Composer Pro, switch to ...Control4 ELK M1: Zone status does not correctly respond properly or Realtime status is not correct
Ensure you are using the latest version of our ELK M1 V2 driver. You can identify this by right clicking on the device in System Design on Composer, and pressing Get Info. The filename must say chowmain_elk_m1_v2.c4z. If the original filename of the ...Control4 Govee: Enable Local Network Control and Troubleshooting Local Lights
Not all Govee lights Support LAN control (an example is that many of their GU10's only support cloud). Some lights may also offer the LAN control setting, however, the protocol may be broken. To confirm full LAN control is supported, use: ...Control4 Hisense VIDAA - Remote Does Not Contain Numeric Keypad
Some TV's in some regions are shipped with a remote control which does not contain a numeric keypad. A remote control must be purchased separately which includes the numeric keypad for setup with this driver.