Control4 Philips Hue: System Requirements

• Related Articles

• Control4 Philips Hue: Bridge Disconnected or Real Time Connection Failed

  Symptoms Control4 is unable to connect to bridge or real time feedback status is disconnected Solution Connection Status Disconnected Ensure that System Requirements have been met. Ensure that Hue bridge is set to Static IP, or a static IP has been ...

• Control4 Philips Hue: Linking and setup of Philips Bridge in Control4

  Prerequisites Ensure that System Requirements are met Ensure that Bridge is running the latest firmware Philips Hue Bridge must be set to static IP, or be reserved via DHCP Driver setup Add Chowmain Hue Bridge Driver to project Set Bridge IP Address ...

• Control4 Philips Hue: "Select Bridge From List Property List is Empty. No Philips Hue Bridges Discovered

  Symptom The "Select Bridge From List" Property is empty, and no bridges have been discovered Solutions Ensure that the Hue Bridge is powered on and connected to the network and internet The Hue bridge must be fully configured using the App and ...

• Control4 Philips Hue: Manual Setup of Hue Device / Light

  Control4 Philips Hue: Manual Setup of Hue Device / Light It is strongly recommended to use Auto Setup to correctly configure and add new devices instead of Manual Setup Ensure that Philips Hue bridge has been added to project and is correctly ...

• Control4 UniFi: System Requirements

  What are the Requirements for UniFi? Control4 OS 3.4.3 is the minimum required. Earlier Control4 OS Versions are not officially supported. Control4 Core Series Controllers, CA-10 or better is recommended for the best experience For UniFi Network, ...