Control4 Hisense VIDAA - Remote Does Not Contain Numeric Keypad

Control4 Hisense VIDAA - Remote Does Not Contain Numeric Keypad

  • Some TV's in some regions are shipped with a remote control which does not contain a numeric keypad. A remote control must be purchased separately which includes the numeric keypad for setup with this driver. 

    • Related Articles

    • Control4 Hisense VIDAA - Device Management Menu does not show

      If the Device Management menu doesn't show, take the following troubleshooting steps Ensure the TV firmware is up to date. The Device Management menu may not be available on older firmware versions. Version 9 or later is required (Under About, ...

    • Control4 Hisense VIDAA: Initial Setup

      Setup Instructions For TV Turn on Hisense VIDAA TV. Configure TV Channels and settings as required. Ensure the TV is accessible from the same network as the Control4 system. Update the TV firmware to the latest version if necessary. This is normally ...

    • Control4 Hisense VIDAA: TV control is erratic

      TV Control only works intermittently Solution Ensure that CEC is disabled on the TV. CEC can interfere with control particularly when devices power on or off Check the stability of the network connection. A wired connection is recommended for best ...

    • Control4 Hisense VIDAA: System Requirements

      Requirements Only the Hisense VIDAA Platform is supported by the Chowmain Driver. Hisense TV's using Android or other platforms use a different unsupported protocol Control4 OS 3.3.0 or higher. OS3.4.X or later is recommended. X4 is supported ...

    • Control4 Hisense VIDAA: TV Does not show pairing menu

      TV does not show pairing menu required to pair TV to control4. Solution Firmware for TV may not be compatible with this driver. Ensure the TV firmware is up to date. Ensure the TV is powered on and connected to the network. Ensure that the IP Address ...