Control4 Shelly: Grouping Lights

Problem

Some customers may wish to group multiple Shelly lights, and repeat the same command on all lights simultaneously, and change all lights using the same brightness/color settings automatically

Solution

Shelly doesn't provide a non-cloud based native group lighting protocol. For light grouping, it is instead recommended to use the Chowmain Light Group Driver which can link lights from different manufacturers together into a single controllable light

• Related Articles

• Control4 LIFX: V3 Agent Is Unable To Discover Lights

  Problem LIFX is unable to discover lights on network Solution This can be caused by a few issues The minimum version required for Control4 X4 (or later) is 20241111. In X4, other versions will fail to load correctly Ensure you are using the latest ...

• Control4 TP-Link: Displaying V2 Outlets as Lights (Without Relay To LIght)

  Problem When using TP-Link (V2 Devices), outlets (and some light switches) by default display as an outlet icon instead of lighting. Our Relay To Light driver may also not operate correctly Solution The Chowmain TP-Link V2 driver now includes the ...

• CONTROL4 SHELLY SUITE: Device Compatibility

  The following devices have been tested with the Control4 Shelly Suite Driver. Please Note, this list is by no means comprehensive. Due to the design of Shelly Gen 2 (Plus), gen 3 and Gen 4, newly added devices which utilise the same capabilities as ...

• Control4 Shelly: Driver shows (Unbound) In Name and unable to configure / Not bound to Shelly Module Device

  Problem After adding Shelly Driver, it shows "(Unbound) in the name and can't be configured, and there is no control. Diagnostics may display a problem that the module is unbound Solution Ensure that latest Shelly driver has been installed from ...

• Control4 WLED: Light Disconnected. WLED Web Interface may should "Could not communicate with Light"

  Problem When using the Chowmain Control4 WLED driver, control to the light is lost in Control4. It may also show a "could not communicate with light" or similar message in the built in Web GUI of the light Solution Ensure you are using the latest ...