Hisense VIDAA
Control4 Hisense VIDAA: TV Does not show pairing menu
TV does not show pairing menu required to pair TV to control4. Solution Firmware for TV may not be compatible with this driver. Ensure the TV firmware is up to date. Ensure the TV is powered on and connected to the network. Ensure that the IP Address ...
Control4 Hisense VIDAA: TV control is erratic
TV Control only works intermittently Solution Ensure that CEC is disabled on the TV. CEC can interfere with control particularly when devices power on or off Check the stability of the network connection. A wired connection is recommended for best ...
Control4 Hisense VIDAA: TV Turns on however does not respond to commands
The Hisense TV turns on, however does not respond to commands Solution Ensure the driver is correctly authorised Ensure the IP is correct and has been set to static. Ensure that there are no IP conflicts with other devices and that Control4 can ...
Control4 Hisense VIDAA: TV does not power on consistantly
Symptoms TV does not consistently power on Solution Ensure that the TV MAC Address is correct and filled in. This driver relies on WOL for connections Ensure Wake On LAN/Wireless Network operates correctly in the driver. Ensure Wake on LAN/Wireless ...
Control4 Hisense VIDAA: Volume Control shows incorrect volume
Problem The Volume Control shows incorrect volume Solution Ensure that the latest TV firmware is installed Ensure that you are using Driver version 20250910 or later Discrete volume control may not be supported correctly when using ARC and is ...
Control4 Hisense VIDAA - Remote Does Not Contain Numeric Keypad
Some TV's in some regions are shipped with a remote control which does not contain a numeric keypad. A remote control must be purchased separately which includes the numeric keypad for setup with this driver.
Control4 Hisense VIDAA - Device Management Menu does not show
If the Device Management menu doesn't show, take the following troubleshooting steps Ensure the TV firmware is up to date. The Device Management menu may not be available on older firmware versions. Version 9 or later is required (Under About, ...